Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi AllThis time, some of my company's access lines are not stable, so I want to check ping to some my partner tunnel IPs with big size.I know the basic syntax of ping by tclsh, but my situation is my router (ISR 4431 IOS-XE) tunnels belong to some VR...
Hi All Please support and advice for my company's issue.We have ordered 1 Cisco Router (ISR4321-V/K9 with SL-4320-UC-K9 and 32x CME-UL) and 29 SIP 7821.But after I finished configuration, no IP phone 7821 could register to CME on ISR4321.1. IOS of IS...
Hi AllPlease advice how to change setting of MAC OS or router if necessaryMy company is using Cisco ASR1001-x with IOS: asr1001x-universalk9.16.07.02.SPA.bin.Due to ASR1001-X doesn't support SSL VPN so I did configure FlexVPN IKEv2. I am following th...
Hi all
Last year our company bought 1x 4503-E with Sup8E. This year we will buy 1 more for redundancy and use VSS to connect between 2 SWs.
We want to reduce the cost, so we want to buy Sup7E or 8L-E. So I wonder if either Sup7E/Sup8L-E can do VSS wi...
Hi All
My office have bought 3 AP AIR-AP1852E-S-K9.
I did configure AP1 to mode: AP & Controller with ME controller IP 10.155.241.5 - AP1 10.155.241.6
AP2 and AP3 to mode : AP only with AP2: 10.155.241.7, AP3: 10.51.241.8
In LAN, we only use stati...
We cannot use IP SLA, because some my MPLS access-lines to our partners are only 1Mbps, so if ping with big size (1400 bytes) by SLA frequently it might affect to the traffic or if SLA run during business hours the result also be affected by other tr...
Hi @balaji.bandi My model is 1001X with v16.9.08. And you can see in the photo, if the number members of list is different, the router cannot run all IPs in list
Thanks @balaji.bandi Actually I did try using list by 2 cases:1st test: as your guidance: it only works if all lists have the same numbers of IP. If IPA, B, C have different numbers of IP in list, tclsh script cannot work2nd test: using format like t...
