Hi,we have the following scenario:PSTN --- MGCP --->QSIG--->SIEMENS HiPath 4000 CUCM Version: 9IOS Version: 15.2.4When a Siemens phone is busy, and a PSTN call arrives we get an "inband information" and "Cause= User Busy" back from Siemens on the ...
Hi,pre-sales question:Is there a possibility for having a call list if my customer use cupc with integrated softphone in case his pc is switched off?Customer requirement is to have a call list even in the case his pc is down. In LYNC there is a solut...
Hi,is there any way to have a wildcard for corporate directory search on ip phones with the standard cucm corporate directory?Background:CUCM 7.1.5IP Phones 69xx / 89xxIssue: Customer has all numbers in E.164 Formate starting with +If he access the c...
Hi,I have the follwing issue.CUCM 7.1.5Phones 69xx / 89xxIP-Phone A - Call forward All to IP-Phone BWhen a call comes in for IP-Phone A and is forwarded to IP-Phone B and on IP-Phone B you can only see the A-Number (orginal caller), but no more infor...
Hi @ all,is there a possibility to stop automatic firmware updates for phones during an update on the cucm cluster. We have a big amount of phones and it would take a lot of ours, if the phones automatically update their firmware. Thanks for any idea...
Hi Phill,as on bug tool, this issue should be fixed:1st Found-In 9.0(0)8.0(2.97031.3) Fixed-In 9.1(0)MN0.1609.2(1)UC1.89.1(1)MN1.119.1(0)MN0.1759.1(1)MN1.129.1(0)PS0.169.1(1)ES19.1(0)SSH89.1(0)SSH9 Haven´t tested, but please report if you did.Regar...
Hi,no this isn´t a bug. But if you want that this does not occur, please create button templates with speed dials and assign it to the phones.Whenever you choose modify button template in phone configuration the cucm creates one for each phone.regard...
For Information, it is a BUG, with no workaround right now.CSCsz89579:http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsz89579CSCsz89579 Bug Details Redirected Number is not displayed during Callforwar...
Hi the problem is the raid controller. Open the server, move the raid controller to the onboard slot o and start the installation again. After installation you can move the card back to old slot and it works. regards, christian
