Hi,I´ve implemented a Pix 501 in my network with several rules. I´m wondering if anyone knows a way to test each rules, also if there is a tool to test throughput and perfomance of the firewall.....thanks in advance...
Hi,Can someone explain me how does the comman: voice rtp send-rcv works???That is the issue:1. I´m unsing CCM for VoIP services in one side.2. The transport that I´m using is a cisco 800 (A p2P circuit trough DSL).If I use the voice rtp comman in t...
Hi,I´m wondering if somebody knows about the maximum UPSTREAM rate that i can get using a WIC-1ADSL. According to the ADSL standar the upstream rate is up to 1024 kbps, but I´m just gettin 832 kbps.thanks and regards,
Hi,Lets say you have a PC connected to a DSL Router for Internet access:1. Upstream = will be the traffic send by your PC to the Internet.2. Downstream = will be the traffic that you receive in your PC. For example when you are downloading a file,...
Hi,You MUST use the same mask, if you don't use the same mask you will have routing problems.Also, what I see is that you are using in the FastEthernet port the Subnet Address. Try this, use in the FastEthernet port the IP 67.133.225.193/27, and in ...
Hi Dave,Check this site:http://www.bitpipe.com/rlist/term/Data-Centers.html?src=googledatacenter_contentYou can find a lot of information on Data Centers.Hope this helps,Regards,Ricardo
Hi, A Loopback interface is a Logical Interface.check this link:http://www.cisco.com/en/US/products/ps5763/products_configuration_guide_chapter09186a00803e8310.htmlregards,Ricardo
