Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello! (excuse for my english )I have a problem with a e1 connection Router A :Router cisco 2811 with a VWIC-2MFT-G703Configuration:controller E1 0/0/0 channel-group 0 unframedinterface Serial0/0/0:0 ip address 172.24.234.27 255.255.255.248 encaps...
Hi Richard.
Normal interface state.
Gi 0/0 UP
GI 0/1 Admin Down
Gi 0/2 Admin Down
Fast 0/0/0 Up
Fast 0/0/1 Up
The routers works normally , lines ok, and devices attached ok, without any reason, no problems in lines PtP , no power problems, lost...
Hi Paul. In my case the problem is in four routers: sh logging Dec 3 07:07:20.131: %ESWMRVL_FLTMG-5-NOTICE: Notice: FPGA Rev 0x71Dec 3 07:07:24.523: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to resetDec 3 07:07:24.523: %LINK-5-C...
