Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I have asked a few questions during the past few months and there are still many issues with it.
I have always tried to configure the device via its ASDM software but there are just too many settings which don't make sense to me so I thought i...
Hello,
I have an ASA 5505 with Security Plus license.
There are currently 3 interfaces set up: outside, inside and dmz.
The dmz consists of a few virtual machines and one AP for a guest network (via VLAN on an
Icom AP90M AP). Everything was working f...
Objective:
Connect devices with a static IP to the internet with DNS server settings pointing to ASA
Background:
All devices connected to the ASA by a dynamic IP assigned by the ASA's DHCP server are provided with the DNS server settings from the ASA...
I have configured the ASA with 3 interfaces (inside, outside and dmz). Inside and dmz get their IP via DHCP and they’re of course on different subnets. Outside gets its IP from the ISP (PPPoE)
Everythings is working fine except for the DMZ interfac...
I know that there are quite a few discussions about this topic and I have read most of them. Unfortunately none of them seems to work so I will ask the question again.
I have an ASA at home which serves both as a router for my broadband connection ...
Hello Rick,I am really sorry for the late reply, but I have been involved with a few other projects.What you tried to explain makes sense, however, I still don't know how to make these settings. ASDM/ASA terminology and the UI itself is far away from...
Rick,
I want to thank you for your patience. I really do appreciate it.
Let me ask a few more questions, maybe I will eventually understand it.
We both agree that there is no device with an IP of 192.168.4.48 and that there is also no IP pool for t...
Rick
I am back home and can access the ASA now. So let's sum up a few things.
1.[Connection from DMZ3 (VMs) to Internet - SOLVED]
You have suggested to issue the following command
nat (dmz3,outside) after-auto source dynamic any interface
whic...
Richard, thanks for your explanation. I have followed your advice and the VMs now do have internet access. Thank you. However, this command has created another NAT rule with the network object in question (48_24)I do have set up two IP pools for VPN,...
Richard,
First of all let me thank you for your detailed explanation.
There are a few settings that I don't know what they are for. For example the "Network Object" ending in ".48_24"
In ASDM it says it is used, however, there is no device in the n...
