kurti
Level 4
Level 4
Member since ‎02-08-2005
‎12-01-2021

User Statistics

  • 7 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Hello,   we are using KVM IP Pools in UCS Manager 4. We have one IP for every Blade in the UCS. Is there any way to reduce the number of IPs in the pool and assign them like DHCP with a short lease?   thanks, Andreas
Hello,we are trying to Setup CWMS 2.5 on VMware via vCenter (5.1). OVA deployment was ok, no error occured. But when I start the vm I get an error while checking the credentials.Hostname is ok and checked. IP Address raises an error "Network-Error 3-...
Hello,we are using Cisco UCS C220M3 with VIC 1225 and Nexus 5548UP. Creating vethernet with autocreate works fine. Now we need to rate Limit the nics or build "smaller" nics than 10 GIG using Adapter Fex. In the Properties of the vnic there are the r...
Hello,I recently configured an IPsec tunnel over an 1GE-Connection. As we need nearly 1GBit we decided to use two 3945 with Crypto Engine.Now that we configured the connection unfortunately the speed is quite slower than expected. We tried to copy a ...
Hello,I wanted to register a SX20 at our cucm 9 - Lab. I did the same as I did for the other devices (like 7965, 9951, ...), Chose SX20 as Device and put the mac in the required field. (I used the options explained in the SX20's Admin Guide)Unfortuna...
Community Statistics
Member Since ‎02-08-2005 10:41 AM
Date Last Visited ‎12-01-2021 12:06 AM
Posts 7