Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,showing active crypto sessions shows peer ip address and port 500.Theres a clear crypto session command where i can choose port (default is 500), so my question is if i also could assign a specisic port to a cryptop map / profile.background is if ...
Hello,where can i find a sample config which uses bgp as tranport between two locations and encryption is setup over bgp "cloud". Also static or OSPF routes from location a have to be transported between two -or more- locations.regradsFrank
Hi,i'm using IPSec+OSPF. There're the two possible solutions for protocol/transprot using Tunnel Interfaces:a) GRE/IP with crypto-map, orb) IPSEC/IP with crypto ipsec profileWhat are the advantage/disadvantage using a) or b)...?My main connection is ...
Hi,how could i find a best-parctice for encryption aes over gre tunneling?2nd question: why do i need to define the "crypto map ..." statement to all participating network interfaces?regardsFrank
Hi,does anyone know a scenario to add additional "hex path identifier" to cisco channel interface (IP Hst Backup Group) without negating the complete Group?i.e. existing is: path d850 1690trying to override results in the following: ...(config-if)#pa...
thanks so far, i already used this document. Theres a CPE example which could match(?).The components i use are more like "all-in-one" CE/PE functionality.The problem is that i'll use RouteReflector and route-target import/export, so i've no "outside...
Hi,pinging from RouterB to 193.10.1.1 (Serial0/0 of RouterC) is using address of Serial0/0 of RouterB (150.1.1.3).I didn't see that RouterC knows Serial0/0 address (150.1.1.3) of RouterB.I think you should propagate Loopback of RouterC (3.3.3.3) to E...
Hi Satya,thanks for all help. I fixed the problem! I've upgradet to IOS 12.2(25)SEB2, connected my devices and now anything workes?! Bevore i've used different IOS (it was testing environment!) 12.1xx and 12.2xxregardsFrank
sorry Rick,i would have rather attached a drawing to describe more...What i have looks like the following:-- Router1(customer side) --- leased link1 --- Router2(local side) ---- Router3(customer side) --- leased link2 --- Router4(local side) --So bet...
