Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We are facing a very weird issue here, let me clarify it:
1. We have some Citrix VDI users here, they use HP thin clients to connect to the server end virtual machines. The structure is like: Thin Clinet ----- Access Switch ------ Core Sw...
Hello,
We set up a Hunt Pilot and configure the "Forward Hunt No Answer" & "Forward Hunt Busy" to one AA on our CUE. Then I use a test phone to dial the hunt pilot number and let all members wait until the call is forwarded to the AA. But I could no...
Hello All,
We are running CUCM 8.5 and we meet a problem here:
We have a Phone (let's name it P_A) in site A, we set CFA of this phone to a external mobile, then the result is as below:
1. Call internally from Phone_B in site A -> OK
2. Call inte...
Hello Guys,
We meet a problem on the HSRP between our two core switches whose model is WS-C3750X-12S-S with IOS version 15.0(2)SE4 on both sides.
We found that the HSRP of all the VLANs are flapping all the time every hour with an example as below:...
Hi Guys, We have 2 WISMs here and one WLAN connected to interface "Int1" and they are working fine. For now, we want to expand the IP addresses of this SSID, so we created several VLANs as well as some interfaces in WLC and created a interface group ...
Hello Georg,I've tried to increase that yesterday and I could not see any misses or trims until now, unfortunately the issue is still there. Regards,Sijian Bao
Hello,We did not have any specific QoS configured for VDI (just some auto qos/mls qos trust cos) before and now. The traffic of Citrix is not much (around 100-200k per user and lest then 100M for each interface connected to the server). Here's the ou...
Hello Deepak,Here's the output:1. sh int XX.X CNGZPSVRRM3850CORE#show int gi2/0/22GigabitEthernet2/0/22 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is ec1d.8b19.3c96 (bia ec1d.8b19.3c96) Description: To_GZPESX002_D...
Hello Deepak,
Yes we've read that when we saw the output drops under the interfaces. Then we followed it to increase the buffer (qos queue-softmax-multiplier command), we do not see output drops any more after that. However the issue is still there...
Hello Deepak,
I tried with CUCM version 11.0 today and FONA & FOB work well, so the BUG you find should be the reason. Thanks for your information.
Regards
Savi
