Hi,My Network is this:Condition One:Packet travels from PC to destination server via dedicated E1.PC>>>>L2>>>>L3>>>PIX(Translation from one IP to other IP is happening here)>>>>>>Router>>>>E1------E1>>>Router>>>L2>>>Server.2. For Redundancy VPN is co...
Hi,I need to understand the following commands of Standard Access-list.ip access-list standard INFINET permit 203.90.101.224 0.0.0.31 permit 203.90.101.192 0.0.0.31What is permit 203.90.101.224 0.0.0.31Please help.Thanks,
Hi,I have upgraded the firmware of 3500 xl switch. When i reset the switch its going to switch: prompt and giving the No such file or directory erro.Whereas if i see dir flash: the ios file is listed there.I am attaching the detail observation/error ...
Hi All Cisco Expert,I have a confusion while applying access-list on an interface.When i create an access-list and apply on an interface as in it works.Whereas when i apply as out it doesn't works.What is the usage of Out and does it actually works o...
Hi,I am getting the following message in Cisco 3745 Router while polling the SNMP Information from MRTG.I am using Version 12.2(13)T4.Whereas the same IOS I am using in another router and there is no problem..C:\mrtg-2.12.2\bin>perl cfgmaker test@172...
Hi Amit,Find the output of each command.switch: flash_initInitializing Flash......The flash is already initialized.switch: load_helperswitch: BOOT:=flash:c3500xl-c3h2s-mz.120-5.WC12.binCan't set variable with illegal char ":" (0x3a) in name. switch: ...
I think you need to remove the ip address defined on fastethernet0/0 on the router and check it should work.Another thing which Layer2 switch you are using. If its 3500xl series try using isl trunking on router.Regards,
Hi,Thanks for the help.You said in will filter packet coming into the interface off the wire..I want to understand this Off the wise and onto the wire concept.......This is what is mostly confusing for me...Let me give you an example..PC IP >>172.16....
