Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,would like to hear if someone have experienced that one of the HA CS pair routers has broken down in pieces and got replaced with a new one?I'm expecting to fire up new router and perform the following steps in order to restore the HA state:1. Con...
HiI have IP Communicator 2 registered to CCM 6.0 with SCCP (DN 1007 on pcap) and 3rd party "P2000W" registered with SIP (DN 1009).I'm able to place calls from the SIP to SCCP but when trying opposite IPCC gets a busy tone. Wireshark sees SIP msg 400,...
Hi, I've tried to find info about timers used with 802.1w RSTP. If network topology is done i.e. with 4 square-looped switches (4500 and 3750), Gbit links, and ports are access not trunked - Can there be used 1 sec Hello timer?What might be the funct...
Hi profs!I'm looking for the solution to make automatic http-to-https switching for the outside users, while they access ProxySRV on DMZ without opening more ports than 443.So idea is giving to the users only an address like mail.company.com and it w...
Hi, without knowing too much how AD works I faced issue while putting clients inside pix and leaving domain controller/file server outside.XP clients will use only directory mapping on simple file server.10.11.0.0/24 with XP-----in_PIX501(v6.34)_out-...
HiI got the same error %ASA-4-402116 when upgraded ASA5520 release from 8.4.(2)8 into 8.4(3)8. When downgraded back with same configuration, it worked again.I'm using EasyVPN 5.0 and AnyConnect 3.0 (IPsec/IKEv2) with similar policies, same IP pool/tu...
Hi, just got curious, but shouldn't you have your static and acl statements like this?static (inside, DMZ_Web_Servers) tcp 192.168.200.5 9877 192.168.200.5 1433 netmask 255.255.255.255then add acl to (DMZ-int in) permit tcp host 172.24.10.13 host 192...
HiI have similar problem. Did you (or anyone)have a solution for this?Our DHCP and DNS is in the same server and DHCP lease shows that the VPN client got an address but client's name didn't get proper format, i.e. if client is named userpc.domain.net...
Hi, I've got exactly the same issue and it seems hard to find info about it.3560(12.2(25r)SEB):interface FastEthernet0/2 description to Mcast destination (VLC Player) no switchport ip address 172.16.2.1 255.255.255.0 ip pim passiveinterface FastEther...
Hi,in case servers are configurable, why not making router as their gateway for reaching just the branch segment and keeping firewalls as default gateway?Otherwise: ICMP-redirect by router obviously instructs servers to use firewalls directly, while ...
