Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are planning an upgrade by mid year, I found a white paper document that says I can down load the scripts to save for upgrade to 5.0 see link below.http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps1846/white_paper_c11-452619-00...
I have an 1841 router at a remote site that does not show the user name and password prompt when the modem is connected. Only a flashing cursor.Using our intranet I can telnet to the router, then telnet thru the AUX port, I can configure the modem an...
Our CallManager is running version 4.2(3) upgraded from 4.1(3) back on November 11, 2009.Lately I have a VG224 that unregisters from its normal CallManager server and tries to register with another subscriber then back to the original sever it is nor...
We have CallManager 4.2(3) in a 4 server cluster on the same campus.I want to allow users to be able to dial 0 to get the receptionist.I also want the receptionist to be the only one to be able to dial the PSTN operator.I believe this can be done, bu...
I upgraded our CallManager from 4.1(3) to 4.2(3) 11/11/2009.Since then this error has perplexed me.I have read all the subject matter I could understand, and done a lot of online research.There was a bug in 4.1(3) just like this, CSCsc85141, which wa...
Thank you for the quick reply.I thought that since both 5.0 and 7.0 share the 2003 OS it would be possible.My next thought is the minor upgrade to 4.0(5), is that so the Data Migration Tool can be used.It appears the DMT works only on 4.0(5) and abov...
I have IPCC 4.0(4), I worked with this issue for quite some time. The work around above did not work for me. I found that uninstalling and reinstalling the Cisco CRS Historical Reports plug-in fixed the issue. For some users problems I refered to Cis...
