Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am planning to implement Wireless security with Cisco Access Point 1200, ACS 3.2.3 with 802.1x and EAP-FAST as authentication method. I am clear with te technologies used in EAP-FAST but i would like to know that what is required at client PC which...
try this switchport port-securityswitchport port-security violation restrictswitchport port-security mac-address stickyit should restrict to single mac-address
We have configured 6513 with SUP720MSFC3 and IOS 12.2(18)SDX3FWSM 2.3(1)IDSM-2 with Sensor Version 4.1Also as per datasheet of 6500 all the above mentioned module specified by you is supported with SUP720-3B
configure the following commands in the router it will work then check in ACS aaa new-model tacacs-server key aaa authentication login default group tacacs+ lineaaa authentication enable default group tacacs+ enableaaa authorization config-commandsa...
Try to configure AAA on firewall through PDM becasue it will be easy for you and you will find an option that first preference will be TACACS+ and other option will be LOCAL,what will happen is first it will try for ACS server if not available it wil...
