Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.I am trying to create bgp sessions in vrf?s through vlans / trunks but I get no TCP sessions.PE: (this running on a 3750)ip vrf PE_CustVrf description CustomerMPLS rd 3292:125 route-target export 3292:125 route-target import 3292:125interface Giga...
Hi,I have an old 2821 with an 12.3 version ios. On that I can do like this:interface GigabitEthernet0/0 no ip address duplex auto speed auto dot1x port-control force-authorized!interface GigabitEthernet0/0.150 encapsulation dot1Q 150 ip address 26.26...
Hi.Running two 2621 routers and are having a couple of site-to-site vpns going through.I am playing around with cef load-sharing on the serial interfaces but receives uneven loads on them.Is it possible that it could be the vpns that concentrate on o...
Greetings.I have a pix515 that is showing PAT entries in show xlate for a whole bunch of customers. But only some of the segments gain access to the outside. Some specifik segments fail to access even though they get PATéd.I have made sure that permi...
Hi.Yesterday I fixed a bgp issue on my two 6509 making one of the boxes the primary on traffic in/out.Now I see that it has a cpuload of 80-90 (or more) % cpuload.And I see that (sh proc cpu) that Earl NDE Task has the top usage of cpupower. 52 14...
Looking at :http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi?get_crypto=&data_from=&hardware_name=2821&software_name=&release_name=&majorRel=12.4&state=:HW&type=I cannot find any IP Plus version?Please advice..
But isn´t the config of mppp an issue where both ends need being configed?So config the router for mppp doesn´t do any good (on the contrary) since the other end isn´t configed. And your lines will probably be in down mode.-- Lars
