Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Can someone help me with this question. We have Cisco Works LMS 2.5 and we have 6509 switches running CatOS. Whenever I make a change in the configuration of a switch thru Cisco View and hit APPLY, changes are made only in Running configuration an...
We have few 6509 switches with SUP1A. Power Supplies are 1300W each and redundant, each connected to different UPS. We have seen a problem which does not make much sense. Couple of switches reboot all of a sudden. We checked and normally one of the U...
We bought nGenius v1.2 alongwith Cisco Works some time ago but never use nGenius. Now I have installed it on Win 2000 "workstation". I want to monitor a network of 6509 switches with CatOS 7.6(10). When I try to add a switch, it does add switch but g...
We have cisco works 4 running properly except for IPM. I am not sure if its been setup wrong or there is any compatibility issue. Please advise whether IPM can monitor 6509 switches with SUP2 and CatOS software v 7.6(10).Any advice will be appreciate...
Hi,We have combination of 350 and 1200 APs in our wireless setup and we are using WPA with LEAP/PEAP with ACS 3.2. User authentication is via RADIUS and APs authentication is via TACACS+. Recently I've made few changes in APs which are:1) Upgraded fi...
Hi,I have faced the same problem in the past and I fixed it by either of the following:- Browser Java version may not be compatible, so try un-installing the one on the PC and then let Cisco Works automatically install the one it requires. - From Cis...
We use Cisco View to make changes like changing the speed/duplex of the port, shutting down the port, changing the VLAN membership of the port etc. Once I made changes thru Cisco View and sometime later when the switch rebooted (due to power failure)...
The best thing is to call Cisco Sales rep for your area and he will provide you with all the details.Briefly, either you get someone for site survey and he/she will let you know how many APs will be required for each floor as per number of users. You...
