Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Customer with a single router and private IP subnet behind router. Requirement is to add high availability using two ISP's and BGP. Inbound services for HA would just be web servers. Public IP's are /28. My questions are:
1. For outbound conne...
I have a site that does not use AD and has static IP addresses for all devices. I am looking for a way to statically map users to IP addresses in Management Center. Is there a way to do this or use the agent but trick it somehow into using a static...
I have one configured NAT and ACL for RDP to a server. When I test with Packet Tracer the results show a dropped packet, but in reality the policies work properly. I can RDP from outside to inside no problem. Why does Packet Tracer show the test a...
I have a CUBE that is configured with a SIP trunk to Level 3 and a SIP trunk to a ShoreTel system. While debugging I can see caller ID name in the FROM header from the Level 3 trunk but the FROM header is missing from the INVITE to the ShoreTel syste...
Thank you, I am able to use objects to create rules but I was hoping to see the users in the monitoring and reporting, but it doesn't look like it is possible without AD.
That was it, I needed to configure PAI globally and on the dial-peer. Thanks for the suggestion!
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/sip/configuration/15-mt/sip-config-15-mt-book/voi-sip-pai-ppi.html#GUID-A7B81C56-E343-41D1-98BF-7...
