About ArisCahyadi

ArisCahyadi · 02-09-2006

Hi All,I want to use SNMPv3 as device credential in the WLSE. But, I don't know, how to configure SNMPv3 in the WLSE. Because I think SNMPv3 is using username/password rather than community string.Any help are appreciated.Thanks.Aris Cahyadi R.

ArisCahyadi · 04-06-2005

I have installed VoIP over VSAT.There is no problem with voice conversation.But I use this VoIP for FAX connection, there is an error because the fax machine in the remote site didn't respond.I have already use QoS (llq, FRTS) but there is not work e...

ArisCahyadi · 02-18-2004

Hi,I have a catalyst 2924-M-XL with IOS 11.2(8)SA5. I cannot use this catalyst for Trunking to other switch because the IOS is standard version. So, I am tried to upgrade with Enterprise version such as, IOS 12.0(5)SA5. After the upgrade, my catalyst...

ArisCahyadi · 07-17-2003

I have done upgrading CCM 3.3(2c) and everything working fine.But if I try to access the IP Phone Service, there is have following syntax error :<!DOCTYPE HTML PUBLIC"-//W3C//DTD HTML 3.2Final//EN"><html dir=ltr><head>......Please help me to solve th...

ArisCahyadi · 11-19-2007

Hi All,I have some experience for implementing sigtran in IP/MPLS network. There are some IP/MPLS network requirement for support Sigtran :1. Traffic Engineering, to ensure that different SCTP association in SS7 connected using different IP path (SCT...

ArisCahyadi · 11-19-2007

Hi,I have the same problem, there are no directory "PRIMARY" and configuration files under "shadow" directory. I try to change configuration in the one device and save the configuration, and the "PRIMARY" and device configuration appear under "shadow...

ArisCahyadi · 05-04-2006

Hi all,I have the same problem with my UGCA.Is there any relation with solaris and J2SE patches ?Thank you.Aris Cahyadi R.

ArisCahyadi · 05-01-2005

No,it was not ever working. I can ping from CRA server to callmanager, and the other way. I can't check directory credentials in CRA AppAdmin, because I can't open the AppAdmin webpages.There is no DC Directory password changes.I try reinstall the CR...

ArisCahyadi · 04-29-2005

I got the same problem.But, if I use bug toolkit, this bug cannot be displayed.------ ###### -----------Sorry -- The defect you have requested CSCdw10767 cannot be displayed.This may be due to one or more of the following: The defect number does not ...

Member Since	‎06-12-2003 05:27 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	16
Total Helpful Votes Received	4

User Statistics

User Activity

How to configure SNMPv3 authentication for WLSE

Fax Over VSAT Problem

Trunking Problem Catalyst 2924-M-XL

Upgrading CCM 3.3(2)spC failed to access IP Phone Service

Re: Sigtran /SS7 over IP MPLS Core

Re: Where does LMS2.5 keep copy of config

Re: UGCA not loading CRs

Re: CRA don't start

Re: CRA don't start