Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
in the ISE distribution deployment we install the PAN persona in the Main site and PSN persona in the remote site the MS AD Main domain installed in the main site and we installed a tree branch of the AD on the remote site 1- I need to integrate th...
I have new system consist of WLC 9800 L AP9461ROW
I am trying to integrate with ISE
the mobile device connect to ssid normally but PC with any connect fail to connect I traced the problem with the ISE admin and he replay that the PC with cisco any ...
I have a 5520 controller in Main office now we will open a new branch with AP C9105A and C9800-L-C-K9 I need that all new access points to register in the 5520 controller and if the link is down they will register to the new one 1- is C9105A can wo...
I have a system one core pair of 6807 VSS ,2 pairs Distribution 6880xl and the access is 6800ia switches
I make a groups of the cameras to circularize every one minute but the cameras take 1 sec delay to appear on the screen every circulationI use ...
thanks al lot the problem was that any connect ver not support wap3 that cause miscommunication between ISE and AnyConnect the ISE administrator trace was wrong
this the error message from ccsip message
Apr 24 17:19:10.233: //5234/CDF1EB800000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not Found
Via: SIP/2.0/UDP 10.68.8.134:5060;branch=z9hG4bK7BEA2D
Record-Route: <sip:10.200.7.157:5060;transport=udp;lr>...
