Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I am connecting to a ASA5505 at from home to the head-office using L2TP VPN.Head-office then has a connection to other-office via a site-to-site IPSEC tunnel.When in the head-office (192.168.100.0/24) I can ping/access remote-office (192.168.200....
Hi i am trying to get my ASA 5505 with 2 internal VLANs (voice and data) and external internet VLAN to run in router as a stick, and route between VLANS.I cant get it working though:From the data VLAN switchport i can ping 192.168.69.1 (local VLAN) b...
Hi, i have two 1242AG access points. I would like to setup a bridge between the two to bridge ethernet lan segments, furthermore i would like to be able to connect wireless clients to either of the access points so i can get maximum range.I did what ...
Im looking to have my VPN server in my DMZ. I have seen two topologies for doing this.One is where the VPN server has a second NIC connected to the internal lan.The other is where the VPN server routes packets through the firewall. I udnerstand this ...
Hi, i have forwaded port 82 to my internal machine, however i cannot access this when on the dmz, any ideas? If i type 10.0.0.1 it doesnt work, the packet is denied. Is there anyway to allow some packets from my dmz onto the internal subnet?Is the pr...
Hi Varun, thanks for the fast reply.It is the base license, from the licnese details in ASDM: 8 phy interfaces, 3 vlans, no vlan trunk ports, inside hosts unlimited.Regards
Thanks for the reply. I had a brain wave, couldnt i do a simple address translation, whereby 10.0.0.1 is translated to the public ip address, and any packets arriving at the interface (on any port), are translated back to 10.0.0.1... much like a defa...
