Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I upgrade one 3750x from version 12.2 55 to 15.0(2)SE7 and i see that some configuration must be changed Warning: The CLI will be deprecated soon 'radius-server host xxxxxxxx auth-port 1645 acct-port 1646 test username name key 7 sharedsecr...
Hi all,I have several questions about the log file on the Nexus. We restarted a Nexus switch few days ago and all the logs before the reboot are not present now.We just have configured the default logging file :Logging logfile: enabled...
Hello,I have maybe a bug on my Nexus 5596 switch ; when i issue the command show interface status the outpout of the "port" is missing :# sh int statu --------------------------------------------------------------------------------Port Name...
Hello all,I want to know how to retrieve the complete configuration for a Nexus via the snmpwalk or snmpget commands...What mib's is needed ?Thanks for the feedback
Hello Florin,
I want to know how you declare the access point on the radius server in order to enable the authentication request send directly by the access point?
Thanks
Regards
Hello,The time out is in seconds not in minutes. When i put "timeout 15 retransmit 3" it says that if the radius service is unavailable it will timeout after 15seconds * 3 times= 45secsh aaa dead-criteria radius xxxxxxxxxxxxxxxxxRADIUS: No server gro...
Hello all,I modify the configuration and now it's working :aaa group server radius RADIUS-SRV server-private xxxxxxxxxxxx timeout 15 retransmit 3 test username xxxxxxxxx key 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ip radius source-interface xxxxx!!rad...
Hello,Thank you for your reply. The password is correct in both sides Also when i put the old fashion config, the dot1x is working correctly = password is correctRegards
Hello,I am searching about WS-C3560E-24TD-S stencil. Does anyone have it ? I know that these switches are end of life but i need the stencil.Thank youRegards
