Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Need to deploy a Teleworker on a network not under our management. Noc for this network needs to know ports teleworkers use to communicated to our Meraki firewall. What ports need to be open to allow teleworkers to connect to our network.
I'm not much on using the CLI. My question is if I use the Web access page for our Cisco 9300 catalyst switch to create a port-channel what is the default protocol? Is it LACP or PAgP. These port-channels will be used for connecting to Meraki swit...
We have a single UCS-Mini-5108 with 3 B-200 blades. We will be running vMware 6.5 on the blades. We've setup a few vlans in UCS Manager but do we need them. I'd rather setup vNics ( around 30 to 39) and equally assign the vNics to each Blade and i...
Checking for thoughts on which would be the best configuration for port channels for the uplink interfaces on our usc to our catalyst 9300 switches.
Option A - Create a 2 port channels on the switches with members TenG 1/1/1 and TenG 2/1/1 for Port C...
It has been suggested that for our connection from our UCS FI to our Catalyst 9300 stack that we create Virtual Port channels for redundancy. A quick search informs me that the Catalyst 9300's do not support VPC's. What's the advantage of VPC's ove...
I ended up opening a ticket with TAC and they helped restore the switch to the factor settings. In the process they download a new config file used it to reset the switch.
