About prashantk

prashantk · 08-28-2019

Hello All, AP (1702i) is not discovering WLC while connecting on SG350-10P Gb PoE Managed Switch. But if I connect the same AP (1702i) on Cisco cat 3560cx switch it has no problem discovering WLC. I am attaching the logs here for reference.What i am...

prashantk · 06-27-2019

Hello All,We are facing the issue with Guest portal redirection and authentication with Chrome Browser.At the time of installation we kept the domain name for AD is ad.xyz.local. But once we click on Guest SSID we are getting "gstatic error" and port...

prashantk · 12-11-2018

Hi, I am not able to enable ssh on SG350-10P gigabit poe managed SMB Switch. I tried it by enabling by GUI in :Security>TCP/UDP>Enable the ssh, https n telnet service after accessing via putty, i am getting the msg "server doesn't support the ssh2 .....

prashantk · 10-25-2018

Dear all, I want connect my CISCO SG300-52 managed switch on 1G fibre link, but it is not working. Is it automatically detect the fibre port or we need to configure it ??? on port 51-52 while connected via cat6; it is working fine.. kindly sug...

prashantk · 08-14-2018

Hi, We are looking for to bind the MAC addresses of AD mobile users in ISE 2.3 or 2.4?? If our policy is per user can login to 2 devices and mac of these devices is bind with ISE. Users wont be allowed to login with his AD credential with other devic...

prashantk · 03-25-2021

https://community.cisco.com/t5/security-documents/dynamic-attribute-with-ise-mac-address-matching/ta-p/3643882

prashantk · 03-25-2021

Hi, I am also having the same logs under my 3560-cx switch for CISCO AP as a PD. TShoot steps which I follows: 1) Run cable test Switch#test cable-diagn tdr int G1/0/3verify: Switch# sh cable-diagn tdr int G1/0/3 - No cable Fault 2) Upgrade the firm...

prashantk · 03-25-2021

Hi, I am also having the same logs under my 3560-cx switch for CISCO AP as a PD. TShoot steps which I follows: 1) Run cable test Switch#test cable-diagn tdr int G1/0/3verify: Switch# sh cable-diagn tdr int G1/0/3 - No cable Fault 2) Switch(config)#...

prashantk · 06-28-2019

Hello Craig,Thanks for your suggestion and valuable time.I have some doubts regarding pinpoint zone.Our primary domain name is “xyz.local” assigning to the IP A.B.C.D.If I created the pinpoint zone under DNS >> Forward lookup >> Name of zone “ise.xyz...

prashantk · 10-25-2018

Hi Mridul, Thanks for all your support and time. I will check out whether this module is available with us or i need to order one. regards, Prashant

Member Since	‎07-30-2018 02:56 AM
Date Last Visited	‎03-25-2021 10:48 PM
Posts	22
Total Helpful Votes Received	1

User Statistics

User Activity

AP is not discovering WLC while connecting on SG350-10P Gb PoE Managed Switch ..

ISE Guest Portal Redirection issue with Chrome Browser..

How to Enable SSH Access for Cisco SG350-10P Switches

how to configured sfp ports on SG300-52 managed switch

How to bind the MAC addresses of AD mobile users in ISE 2.3 or 2.4 per user/device??

Re: How to bind the MAC addresses of AD mobile users in ISE 2.3 or 2.4 per user/device??

Re: Error Message:%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface <interface> Power Controller reports power Imax error detected

Re: Power Controller reports power Imax error detected

Re: ISE Guest Portal Redirection issue with Chrome Browser..

Re: how to configured sfp ports on SG300-52 managed switch