Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are currently running version 3.16.9S and are still experiencing this bug. Does anyone know if this bug is in fact resolved in version 3.16.10S? Regards,Travis
In Mobility Express, are you able to Create 2 WLANs and assign as needed to specific APs? Example; WLANs 1 and 2APs 1 and 2 We need to assign WLAN1 to only be available on AP1 and vice versa. We do not want WLAN1 showing on AP2 for example. We are us...
Try creating a layer 2 VLAN, make the port to Level3 and your firewall access ports on that VLAN. Also try removing switchport nonegotiate. conf tvlan 200name INET!interface FastEthernet2/0/1description *** uplink to active fw ***switchport access vl...
Try setting the speed and duplex manually on both trunk ports. Make sure you make the change on the remote (edge) switch first. Also see if you have the switchport nonegotiate command available on both ends.
This worked for me, scroll to the bottom to change acllog level to 3. https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/118907-configure-nx7k-00.html#anc13
