Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I'm looking for a bit of advice - I have a single Cisco 9130AXI access point at home which I have set-up according the the best practices analyser. The question I have, being a single access point in the whole environment, is there anything I...
Hi, I've tried everything that I can think of, and this is a strange one to me. I have a 9130AXI single AP, with EWC 17.7.1, whenever a client is transferring at high speed on the 5GHz radio, all clients drop off, including the one transferring data,...
Is anybody else using the MobilityExpress 8.10.105 with WPA3 enabled? I'm getting an annoying thing happen where clients are booted every 24 hours and take an age to reconnect, which when you have AppleTVs streaming can be annoying as they drop and t...
Hi all, I have a 2x unit set-up with 3802i access points running mobility express. While the iOS devices will successfully switch between both access points on the fly, MacOS system will stick to the old base station. Have I missed any settings that ...
Hi, Is there anyway to enable Country Code broadcast on the 5GHz channel with Mobility Express running on a 3802i? The reason I ask is that we are in a highly populated WiFi area, and some APs are broadcasting the wrong Country Code - and this plays ...
I'[ve followed the best practices guide to 100%, just getting the occasion channel flip flop under heavy use - thought I had sorted that, but it cabe back and what I disabled was just a red herring. I was more interested in if there is anything that ...
Yes, but this is a single AP, and not in an enterprise environment, this is at home, so channel overlap etc. is not an issue. Plus I need the bandwidth as frequently edit files stored on servers - and 802.11n just doesn't stream raw 4K/8K very nicel...
