I have some problems getting my 2700 access point to join my 9115 ewc running 17.9.3 software. I tried using a C9800-CL on a esxi and the access point got the correct software and joined that controller.
FW is open and connectivity to tftp server is...
Hi,
I have setup 2 C9800 in a lab environment and cannot get the clock to sync. I have manually setup the time with the correct timezone and offset.
And the ntp server is reachable. Upstream is open.
CLI commands:
Show ntp associations
show ...
Hi.
I have a 9120AXI ap running version 17.3.6.76. I have a 10 ap's in production that I runs 17.6.1.13 code. I want this new ap to join the EWC controller instead of upgrading all 10 ap's in production to newest release for now. If that is possible....
I have one 2800 AP and one 1815 ap in cisco mobility express mode. I want two SSID where each SSID has their own vlan. I want my network to have vlan 10 and the rental apartment under me to have vlan 5. I have configuered my Cisco 3560 switch with ro...
Hi! I have a 2800 AP in mobility express mode but I cannot get my other 2700 AP to join the controller. I have the time right but the 2700 ap do not want to join the mobility express controller. Everything is reachable l2 and l3. I see the 2700 ap in...
I run 17.6.1.13/17.06.01.0.250 on the ap's in production. Since the controller in production is under 17.6.3 I need to upgrade all ap's to 17.6.4, correct?
Cisco IOS XE Software ReleaseUpgrade Release17.3.5b or earlier17.3.6 or later17.6.3 or earli...