Multiple SSID with Multiple VLans with cisco mobility Express?
I have one 2800 AP and one 1815 ap in cisco mobility express mode. I want two SSID where each SSID has their own vlan. I want my network to have vlan 10 and the rental apartment under me to have vlan 5. I have configuered my Cisco 3560 switch with routing and vlan 10 with IP 192.168.10.250 /24. Vlan is configuered with 10.0.0.250/24. Can somebody please help me with what I am missing? My local ISP router have DHCP enabled and gives out IP to managment network wired and wireless but I cannot get the "guest" network to get out on the internet. Thanks for any help!
Here is the switch config:
Vlan5 10.0.0.250 YES manual up up Vlan10 192.168.10.250 YES NVRAM up up
This is the trunk that goes to the local ISP router I have in my home:
Gateway of last resort is 192.168.10.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.10.1 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 10.0.0.0/24 is directly connected, Vlan5 L 10.0.0.250/32 is directly connected, Vlan5 192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.10.0/24 is directly connected, Vlan10 L 192.168.10.250/32 is directly connected, Vlan10
192.168.10.1 is my default gateway from the ISP router. I get vlan 10 to work but I need some pointers on vlan 5 traffic.
My Wlan settings is in Wlan1 and Wlan2 images below. Thanks for the help!
Listen: https://smarturl.it/CCRS8E33 Follow us: https://twitter.com/ciscochampion The goal for stadium and large venue Wi-Fi is to deliver an exceptional, fast, and reliable wireless experiences to tens of thousands of fan...
We are pleased to announce the immediate availability of the IOS-XE release 17.6.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
This version now introduces experimental new feature, "Upgrade Advisor, targeted to one of common case generators: what are the supported versions and how to upgrade my current controllers and APs
It supports both AireOS and IOS-XE, covering since ...
Thank you for the overwhelming response to the First and Second EFT refresh of 8.10MR6!
We are excited to announce the third refresh of 8.10 MR6 EFT Program for PRODUCTION deployments.
While the CCO release of 8.10MR6 is just a few we...
Greetings!Thank you for the overwhelming response and feedback for the first 17.3.4 EFT/Beta release.
Now we are excited to announce the second refresh of 17.3.4 EFT/Beta Program for PRODUCTION deployments.
This release is the s...