Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a question about adding a new switch to our fleet of cisco switches and having issues in that I am trying to get routing via a cisco core on a Juniper switch via the cisco management vlanThe switch has a VTP domain with its interface setup as ...
I have 2 4900Ms, Cisco 1 - trunked to a new Juniper EX4600 and am testing a migration strategy. I setup IRBs with IP address on the Junos and trunked to the Cisco - works perfectly! (IRB's are junos equivalent of interface vlan )The migration test w...
I noticed our fleet of HP Laptops has dropped the Cisco compatibility shortly after purchasing them HP Probook 435 I have noticed that the client drop. I have 802.11r and 802.11k with Radius authentication AES I am at a loss with what is happeningI h...
I have run sysinfo on our 5508 and get this Manufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 8.5.171.0Bootloader Ve...
Hello I am looking for some expert help for applying QoS across our Cisco network. BackgroundPort use teams - Voice port 50000:50019 (mark DSCP 46), video ports 50020:50039 (mark DSCP 34), and sharing ports 50040:50059 (mark DSCP 24).Teams marks port...
Thank you There is pruning, Upon enabling the interface, I see a broadcast (ffff.ffff.ffff.ffff) and then see mac addresses then they vanish.For compatibility I am running VSTP on the Junos however there is evidently incompatibility on the native vla...
This is what i have with a different native vlan. sh interfaces te1/7 trunkPort Mode Encapsulation Status Native vlanTe1/7 on 802.1q trunking 998Port Vlans allowed on trunkTe1/7 100-103,110,304,710,911,996-999Port Vlans allowed and active in manageme...
https://community.cisco.com/t5/switching/shut-down-vlan-and-interface-vlan-shutdown/td-p/1945949I have found where I got the original information from. the post statesconf tvlan 123shutThis changes L3 to L2?
