Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All We are trying to achieve a solution where by using a single tunnel group will authenticate with cisco ISE and determine by the use of the ISE policies which of 2 group policies a user should be in . This looks to be working correctly, when ...
Hi All , I have Cisco prime reporting in monitoring - monitoring tools- clients and users for MAB and dot1x in "authentication type" I cannot seem to get any 9300'S or 3850'S to do this . I thought it may be the dot1x SNMP trap but this is not avail...
Hi All I would like to assign the management IP addresses of my AP's with static IP addresses on the WLC . I am wondering if I have an AP with an IP address of 192.168.1.50 and the DHCP scope is 192.168.1.50-100 will 192.168.1.50 automatically be ex...
Hi All I am experinceing a very strange issue. We have a pair of Nexus9000 C9372PXWe are seeing issues with UDP / Skype calls . I have set up IPLSA's everywhere in the network and the only bad reponse is through these core switches . IPLSA beyond th...
I was hoping you might be able to help me . I am needing to upgrade the IOS as mentioned and “may need” to upgrade the FUS . As the IOS I need to use the 2802 controllers is going to be 8.5.135 which is fine . I am trying to determine what FUS they ...
Hi All I am having issues with 3850's and 9300'S . Prime doesnt show an of the ISE details but does show client details , VLANS etcWhat I dont see is the columns for ISE, auth type, auth profile, authenticationThis is within the Montoring/Monitoring ...
Hi All, I know this is an old post , any fixes for this setting to 0 doesnt work. We use PRIME and KIWI , So autologin , for some reason we see enable_1 trying to authorise , and login to Cisco ASA's causing alerts to out SOC team .
