Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all!I'm deploying SSL VPN on my Cisco 2801 router using the AnyConnect client. Before any configuration I upgraded the IOS image to the newest Version 12.4(25e) using the c2801-adventerprisek9-mz.124-25e.bin image.When logging in to the router wit...
Hi all!I had an experience on one of my many 3550 switches.A customer called and said that he couldn't connect to the internet one evening. When first line support went to have a look, he observed that both of the status LED's on the NIC flashed in a...
Hi!I have a problem on my AIR-AP1121G accesspoints. Sometimes they cannon be access via telnet, it works fine after a reload. This happens not very often, but when it happens, I need to reload it manually.I'm using a backup tool, for backing up the ...
Hi all!I don't know if this is a basic issues / knowledge, but I'm kinda confused about it.I have a ASA 5520 configured with a inside and outside and dmz interface. I have several public IP in use for webservers and stuff.The case is: When I wants to...
Hi! I'm getting this error on an access switch.%CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet0/9 (not half duplex), with SEP00141C8Dxxxx Port 1 (half duplex).Why is the phone port 1 half duplex? Shouldn't the phones be configured ...
Update:I've now testet a bit, of what you requested.By the way. This problem suddenly arose without any config change.naikumarThe switch didn't learn the MAC-address of the PC when connected to the interface.There was no errors on the router.I didn'...
It is on the correct VLAN. It's a normal PC connected to this int.No messages in the log relating to the particular int.Do you think a reload would solve the problem?Here you go!Show version:Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), ...
Could you give a description of why this is not common to access the webserver on its public IP from Inside and inside its own DMZ?It's because server1 needs to access a lot of websites to manage a login system. The system works by URL, and all the U...
