Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a WS-X6816-10G-2T module with X2-10GB-SR modules. I will be getting a SMF hand off and the length of the termination is around 100 meters. (I will be getting another hand off for Inter-DC link for which I have X2-10GB-LR module). The quest...
Hello, I have a query regarding box-to-box redundancy - What will be the status of circuits in redundant CSS? Currently I have couple of CSS configured for box-to-box redundancy. The primary works just fine, while all the circuits on secondary are sh...
Hello, I have a query regarding box-to-box redundancy - What will be the status of circuits in redundant CSS? Currently I have couple of CSS configured for box-to-box redundancy. The primary works just fine, while all the circuits on secondary are sh...
Hi All, I have a Cisco 3750 switch on which I am seeing the bridge priroty to be 49152. The default bridge priority has not been changed as seen from the running configuration given below -!version 12.2no service padservice timestamps debug uptimeser...
Hi All, I have a weird problem when in, I am unable to ping a router sub-interface IP address using a loopback or ethernet interface on the same router. Where as the same works on all other routers. Here is the configuration and ping status -interfac...
Found a note in CSS redundant configuration guide under 'Configuring Redundant circuits' -The redundancy command causes the specified VLAN to become silent when in backup mode.Does that mean the circuit enabled for redundancy will be "down-ipDisabled...
Found a note in CSS redundant configuration guide under 'Configuring Redundant circuits' -The redundancy command causes the specified VLAN to become silent when in backup mode.Does that mean the circuit enabled for redundancy will be "down-ipDisabled...
Hi Prashant, Cisco has some useful documents to troubleshoot high CPU usage -http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a70f2.shtmlhttp://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/troubleshooti...