Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Introduction
If a DBS-110 or a DBS-210 base station is running a very old firmware such as 4.50, and it needs to upgrade to a newer firmware such as 5.0.1 (latest at the time of writing), you will need to upgrade to an intermediate firmware version ...
Where can I find the client root and subordinate certificates that the MPP devices use for SSL/TLS?How to – Install a custom security certificate on MPP devices?Why MPP Devices might not trust our provisioning server security certificate?How to -...
Introduction
All MPP phones have a Cisco signed client certificate, but they might vary depending on firmware and/or hardware version. The quickest way of establishing which client certificate the phone is using, is to enable HTTPS and check what SSL...
Hi there,
You will need to connect your pc/laptop to the other network interface of the ATA. The 192 works as a router, and will assign a DHCP address to your laptop on the 192.168.15.x range. The ATA address will be 192.168.15.1.
You can enable pa...
The activation code can be used with Broadworks, Webex Calling platforms or EDOS/CDA redirection. You will need to get in touch with Ring Central in order to get your devices provisioned.
You might be able to.. but its beyond my knowledge at this point. If all you're trying to do is to push a bulk profile rule, why not use action url? you can get the script to read form a list of IP or subnet and push it.
Hi there, The only way you'll be able to change the profile rule or upgrade rule via script, is if you use action URL. Something like this: http://{ip_address.strip()}/admin/advanced/resync?{file}'http://{ip_address.strip()}/admin/advanced/upgrade?{f...
