Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I was just wondering if there was a way to backup the firmware from LWAP AP's to a tftp server?
The reason is and maybe someone might be able to help out or suggest something is that I have 2x 1142 LWAP AP's and 1x 1142 autonomous AP in my la...
Hi,I'm trying to build a project where I utilize a Cisco 877 as a dumb modem by briding the ATM interface together with an Ethernet interface (VLAN) in this case due L2 switchports.The online documentation for RFC 2684 bridging states that I should b...
Hi,I'm trying to configure MAB on a Cisco 3560G to work with FreeRADIUS.I have been assured that my RADIUS configuration is fine and the server is functioning properly.This is my current switch config:Header 1!version 12.2no service padservice timest...
Hi,I'm having a strange problem in the office with one of my Aeronet C1240 access points.My current topology is a hub-and-spoke with my HQ which contains 2 Cisco wireless LAN controllers with version 6 OS. I have 10 AP's, 2 of which are in the HQ bui...
Hi,my company was considering implementing a service where multiple layer 4 traffic is routing through different ISP's.We currently have 3 ISP's with aggrogate 60Mbps bandwidth approx. for our WAN networking system which is connected to the internet....
[quote]@Leo Laohoo wrote:
@kayasaman wrote:
I was just wondering if there was a way to backup the firmware from LWAP AP's to a tftp server?
Download the CAPWAP IOS from the Cisco website and make sure to get the file with a TAR file extension.
[/quo...
Well.... the easiest method is to use the archive upload-sw command:
https://supportforums.cisco.com/t5/wireless-mobility-documents/how-to-backup-ios-images-from-autonomous-access-points/ta-p/3113336
start by issuing that on both lwap and autonom...
Actually I spoke a little too soon.....
I pushed the image to the IOS AP and get:
ERROR: Image is not a valid IOS image archive.
I used the command reference here:
AP#archive download-sw /force-reload /overwrite tftp://10.0.0.5/c1140-rcvk9w...
