Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone run into this issue before? Two 5548 switches running switch profile and it got out of sync (probably because one of the switches lost power before it has chance to save configure). Once the switch profile out of sync, you can't make any c...
A fundamental question on CBWFQ:My understanding of ?bandwidth? statement on CBWFQ is: 1. Minimum bandwidth guarantee; 2. Weigh(ratio) for bandwidth allocation: For instance, bandwidth 20% to class A and 5% to class B, if there are only two classes t...
Preparing to deploy CSS11506 in router mode. Is it better to disable spanning-tree on the CSS and enable portfast on both switch and CSS? I think that will have better startup or failover time. Anyone has insight or any pitfall should be avoid? What'...
Has anyone seen this message before?Mon Oct 16 16:48:24 2006: Received Anchor Export request: 00:0b:7d:15:46:5a from Switch IP: 150.123.150.251Mon Oct 16 16:48:24 2006: WLA...
Is this possible? site to site vpn between a 3005 and a router.Want to run dynamic routing for the private networks behind 3005 and the router, is there a way to do it?Thanks,Yatao
The config is at the bottom of the last message.What you suggested is frame-relay traffic shaping, I am using Cisco current recommanded way:Class Based frame-relay traffic shaping.Acutally I tried to change to frame-relay traffic shaping as well, the...
Joseph,The ratio works great with T1 links. And yes, I did run into problem with higher bandwidth pipe. The ratio works great with T1 or a couple of T1s bundle, but with anything above 20M, it doesn't work any more. You are right again with ATM inter...
Actually the link you sent just confirmed what my understanding. Look at those words from the link:In the first example, policy-map foo guarantees 30 percent of the bandwidth to class bar and 60 percent of the bandwidth to class baz. policy-map foo ...
