Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
initially was able to connect SSH but then lost all connectivity to guest. After poking around trying to restart it, the power off command failed because it says the vmdk is out of space. Please see attached.
I'm looking for show commands that would help justify a DFC versus CFC for a 10GE line card in a 6500. What show commands are best for showing the utilization of the forwarding engine? I'm interested in commands give a good presentation of either D...
Anyone have current experience with Modular IOS? It has been a few years since this feature set was released. Is the code fairly stable now? We are doing device upgrades for our core routers and I could see where we may benefit from modular even thou...
As of version 1.3(1), UCS supports up to 512 VLANs. Getting that number of VLANs configured and ready for use, however, can take time. The user interface to add VLANs in UCSM currently only allows for adding one VLAN at a time. Below I describe a met...
It looks like since the vmdk ran out of space this lab appears to work but the teardown commands aren't being executed since it can't power off. I notice when the setup script runs everything returns already powered on so I think it is stuck in this ...
Power Off ended with status Failed with error: The operation cannot be allowed at the current time because the virtual machine has a question pending: 'msg.hbacommon.outofspace:There is no more space for virtual disk 'PassThru_Ubuntu16.04.vmdk'. You ...
If it is a "clear view of . . . network traffic paths" you're after, then 1000v is the way to get just that. Netflow and SNMP capabilities are terrific on the 1000v platform. For a long time now with VMware, the closest view you had to individual ser...
Can you point me to current documentation that details current best practices and configuration when using Microsoft PKI and SCEP to enroll and subsequently auto renew certificates issued to remote routers?
