Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I would like connect the module SFP-10G-BX40U or SFP-10G-BX40D, in card C6800-16P10G (C6500E).
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html
In the link, above this is not...
Hello,I've 5508 WLC and adding a new 5760..I know, it's possible for this 2 to be in the N+1 model (version 7.6)If the 5508 or 5760 goest down, the AP previously associated to the failure controler, need to re-download the image to join the active co...
Hello, I would like to understand that it would be the solution the most adapted in architecture ISE when the PSN server is on the central site and my remote site does not possess PSN and no equipments converge access.What takes place it if my link b...
Hello,Is it possible to access the good version for this fonctionnality show policy-map multipoint?CSCti71071:Symptoms: The command show policy-map multipoint does not show any output on a hub,configured with a per-tunnel-QoS policy on its tunnel int...
Hello,data9 is enabled in my platform. But the problem is still present. When you will provide the next release for that platform. This feature has been sold by my client. Thank you for your help.ByeDavid
Hi,Does the user exist on the users DB the NPS is using to authneticate? YesWas the password enterd correctly? YesHave you tried with the same user on another switch? Yes Does it work there? YesThksDavid
Hello,In the last version of LMS 3.2, with DFM version 3.2.0, I dont integrate this equipment and only that. But it is visible in all the other modules. Do you have an solution or a patch to integrate this element.Thanks in advance for your help.ByDa...
