Design Controler 5508 & 5760 Compatibility - N+1

[martinez.david2]

Hello,

I've 5508 WLC and adding a new 5760..

I know, it's possible for this 2 to be in the N+1 model (version 7.6)

If the 5508 or 5760 goest down, the AP previously associated to the failure controler, need to re-download the image to join the active controler.

Is it expected to change this constraint image reloading ? If yes, when ?

This is still a Cisco Validated architecture ?

Tks a lot.

Bye.

David

[Rasika Nayanajith]

Unfortunately these 5760 & 5508 AP images are not exactly same. So if fail-over occur AP has to re-download the image.

Yes, this has to be fixed, but not sure when.

Also there is no CVD for anything related to converged access, very bad indeed

HTH

Rasika

**** Pls rate all useful responses ****