Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
running a 4006 with 5 actively used vlans, IOS 12.1(8a)EW1vlans 104 and 105 used for workstations, vlans 103 and 115 used for servers.vlan 106 used for RAS. DHCP on vlans 104, 105 and 106 only.hosts on vlan 104 having intermittent problems (ping = r...
I just added a NM 2W card to my 2621, with a WIC-1DSU-T1 card, and it is not showing up as an available interface. The NM 2W card had the 'en' light on at startup, but now no lights, and it does not appear available. Do I need to do something else ...
I am getting intermittent ping failures between some servers on my 4006. They are all on the same subnet, I have tried different modules and different switch ports but get the same inconsistent and random results. Where do I start looking for error...
the server in question is an audix (voicemail) server, not voip, but I heard from a colleague that he had seen an issue where the audix server 'forgot' what the default gateway is, even though looking at the config it is clearly set correctly. this ...
thanks - will try to upgrade this weekend if still not resolved. I am replacing this switch in 2 months since it's EOL/EOS anyway...the 'problem host' is an Avaya audix voicemail server, and after discussing with peers have learned that they have se...
here is my configthe 'problem host' is currently on port fa3/40. I had switched it to port fa3/42 but switched back after this did not correct the issue.at this moment, I can ping from another host on 115 but not from a host on 104.thanks all
1. verified ip and mask are correct2. please explain - should it be enabled or disabled?3. don't believe this could be a problem as connection is intermittent, can't be narrowed down based on day/time
