Dear Cisco Community,I have deployed 2 APs of model AIR-AP1832i-E-K9 on a client network but the Aps are not joining the controller. WLC Model is 2504 and Software version: 8.0.121.0DHCP is enabled on the network as well as option 43. WLC is reacheab...
Hi, I have a challenge with a client,here is the issue.They have 2 aggregate switches, SW1 and SW2 in branch A. SW1 got damaged during lightning , so they switched to backup SW2, now pinging the switch from branch B using cmd it is not reachable but ...
Please kindly assist me on this, i cannot ping the switch but access and phones are working fine on it. I have been on this for the past 2 days without any result. attached is the config file. Please help me check to know where am missing it. THANKS....
Hi ,I have been troubleshooting this switch 3850 about 3 days now but still no luck. The switch cannot connect remotely through SSH. i did sh ip ssh command:RESULTSSH Disabled - version 2.0%Please create RSA keys to enable SSH (and of atleast 768 bit...
Pls, guys, I have a challenge which is giving me concern. Our company plan to change some switches which are End Of Life(switch 2560, 3560 and 3750 series) with new cisco switch 3850 series, I configured these new switches using the same config file ...
Please the version of our AP (AIR-AP1832i-E-K9 ) is 8.5.140.0 and WLC 2504 version is 8.0.121.0My question is which version of wlc will i upgarde to 1) that will work with my access Points (AIR-AP1832i-E-K9)2) Also work with existing APs on the netwo...
@daniel: Is there any other workaround apart from updating wlc?I can only ping the controller from the network switch not from AP.AP connection to controller is not reachable
Below is the commad i used : no ip ssh rsa keypair-name sshkey ip ssh server algorithm mac hmac-sha2-512 hmac-sha2-256 hmac-sha1-96 hmac-sha1 ip ssh server algorithm encryption aes256-ctr aes192-ctr aes128-ctr crypto key generate rsa [Modulus 1024] s...
