!
! Last configuration change at 22:12:49 GMT Fri Jan 15 2021 by nkoch
! NVRAM config last updated at 22:12:58 GMT Fri Jan 15 2021 by nkoch
!
version 15.7
service timestamps debug datetime msec
service timestamps log datetime msec
service password-en...
Hello,I have a AIR-CAP2602I and am getting about 20Mbps on speed tests. Was wondering what the optimal settings are to reach the 450Mbps or at lead something close to my ISP limits. Thank you.-Nate
I can't seem to get zbf and port forwarding working. Current configuration : 15831 bytes
!
! Last configuration change at 10:07:40 UTC Sun Feb 9 2020 by nkoch
! NVRAM config last updated at 04:38:27 UTC Tue Feb 4 2020 by nkoch
!
version 15.7
no servi...
I am having trouble setting up ipv6 with HE Tunnels on Cisco IOS. I have the tunnel setup on the device. I can ping ipv6 from it.Lets say HE gives me 2001:470:1f19:43::/64 for my routed 64. I have a switch I need to ipv6 to my router. and several vla...
Here are my configs for myRouter:!
version 15.7
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service pa...
It's a stand alone device running off of a Cisco Switch, Connected to a Cisco Router. My hardwired devices work fine and I have tested a non Cisco AP running bridged. The software version is version 15.3 with the rom that shipped with it from ebay.Th...