Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Trying to extend the number of ports of two Nexus 9Ks by hanging Nexus 93108s off them. They are connected via cross connects (not fiber). I can't get the "new" switches to talk to anything. What am I missing? I've trunked the connections and lef...
Having existing B2B VPN tunnels that use a specific range for NAT'ing private IPs. Have run out of IPs in that subnet so requested an additional subnet from the ISP. Here's the conundrum - using both subnets in a tunnel does not work. Either subne...
Current configuration: Core: 3750 (stack of 4) connected to router (via port-channel), catalyst switch (via port-channel), firewalls and Nexus (via fiber port-channel)Have a new location within the data center, so need to break the 3750 stack (re...
Hello,Need some assistance. Inherent network routing issues. Trying to connect from a router in one data center to an on-prem SmartNet Software Manager server in another data center. The routers are connected via L2VPLS (10.255.x.x), then the core...
Got a bit of a conundrum Running a Cisco 5525-X ASA. This is the firewall as well as the endpoint of the B2B VPN tunnelsLately have several B2B VPN tunnels where AWS is the other endpoint. Creating ACLs:AWS uses CIDR ranges where the minimum is a /2...
Hello,Not sure about SVI's and trunks. You are definitely dealing with a newbie. First time I've had to attempt this.Features: that is new one on me. There are a lot of features enabled on the existing 9Ks (feature tacacs+, cfs eth distribute, fe...
Hello,I don't have an actual diagram. The new switches are in a private cage/ racked. The connection goes to the patch panel at the top of the rack. The mate is outside the cage at the top of the rack on the floor where the existing N9Ks live. Ho...
One endpoint of the tunnel is an ASA 5525-X, the other is a client's AWS. We NAT our private IPs to a public for use in the tunnel. NATs are done on the ASA.
Thank you for responding.It's two subnets (192.58.245.64/27 & 192.58.202.16/28) being used for NAT'ing in the same Site-to-Site VPN tunnel using iKEV1 on a 5525-X ASA
