05-22-2019 12:36 PM
Good morning everyone,
I have a problem and I'm not sure how to solve it. I try to explain.
I have a UC540 with severals SPA514G and everything works fine.
Now we have added a sip trunk in the UC540 and it also works well but the problem
is as follows, the sip tunk has 6 channels, so 6 calls can enter simultaneously in
the worst case. Well, the problem is that the SPA514 only allows 2 calls per line
and if there is a third one, it appears that the line is busy.
As I said, I only setup one of the 4 possible lines configured, and I can not
assign the same extension in the 4 four lines.
Can someone help me on how to get more calls in an SPA514G IP phone simultaneously?
Thank you very much in advance.
05-22-2019 01:33 PM
05-22-2019 01:53 PM
Go to the phone web page:
http://IPADDRESS/admin/advanced
Now go to Voice->Phone->Miscellaneous Line Key Settings->Call Appearance Per Line
Set this from 2 to 10 or whatever number suits for your purpose.
After this the phone will be able to handle more than 2 calls.
Thanks.
05-23-2019 08:16 AM
05-24-2019 08:00 AM
or on LCD go to settings->network configuration->web server.
Make sure that the web server is enabled and retry.
If its already enabled try try https?
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide