5350 IP calls re-routing

[camhnetwork]

Dear Netpros,

I have a 5350 router that I want to use to accept Ip calls and reroute them back to internet I want to loopback the calls using the 2 T1 interfaces but I dont know how. your help with a configure example or hints on how to do this appriaciated.

Thanks in advance.

Thanks

mohamed.

[mchin345]

You can make use of the Dial peers & Dial plans availabe with Cisco IOS. Use the following links to understand and configure

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080147524.shtml

[kramer700]

i do not think that dial peers will help.

you need back-to-back solution.

I'm also facing the same problem, so if you have any solution, please let me know.

i am thinking of connecting to t1 ports with cross cable and terminating and originating the call in the same server, but there is no info regarding this for 5350.

[happykiran]

Hi,

I have done this configuration on an AS5400 joining two E1s and made a reference copy of the changes to configuration.

Please look at the attachment. Hope it helps.

Kiran.

[kramer700]

Thank you.

Yes, it helps a lot.

The solution is pretty logical, I just did not know if someone have done it, becouse I did not found any info enywhere.

My main reason is to handle Ip-IP calls with DTMF collection and so-called IP-IP gateway do not provide this feature.

Thanks again.

Kroum