Bearer trunks from AS5350 to PGW

[elnurmirba]

Hi, I have a PGW2200 and as5350 connected to siwtch(SS7) and PBX(ISDN PRI Q.931). I have configured SS7 signaling link termination from iSLT of 5350 to PGW2200 and ISDN PRI termination in 5350. Now I have no idea how to configure remaining voice timeslots of SS7 link, and how convert between SS7 and PRI beacuse of my PGW2200 is in nailed mode.

Could anyone help?

[Chester Rieman]

Start with the planning worksheets:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9plnprv.htm

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9appb.htm

And be sure to have a good read of the documentation:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/index.htm

Here is the section on adding nailed trunks:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#wp1021012

Hope this helps....