Calls Accounting and Gatekeeper

[andrew-ivanov]

Hello!

Can I register the "called number" DNIS when I use gatekeeper accounting and Tacacs+. Tacacs receives

a lot of h323-accounting information but nothing about destination address?

!

aaa accounting connection h323 start-stop group tacacs+

!

gw-accounting aaa

acct-template callhistory-detail

!

gatekeeper

accounting vsa

!

Following list of the h323 attributes

has been received from the gatekeeper:

h323-gw-id

h323-conf-id

h323-call-origin

h323-call-type

h323-remote-address

h323-disconnect-cause

Thank you.

Best regards.

[amitgami]

Hi Andrew,

Though I have never used Tacas+ as billing server for VoIP, I guess the CDR records should be same for Radius and Tacacs. The CDR list is very exhaustive in nature and SHOULD contain DNIS by default. There is no special configuration required for sending DNIS in CDR.

Please refer to following documents for CDR reference. It is a good idea to use gateways for obtaining CDRs, since they provide far more fields of information compared to gatekeepers.

http://www.cisco.com/warp/public/cc/so/cuso/sp/sms/acct/caaaf_cg.htm

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_programming_reference_guide09186a00800b5e17.html#xtocid1350

thanks and regards,

Amit.