CLI problem with PGW

[pax_2111]

I have enabled CLIDefaultAllowed on ISUP links and CLI is carried properly from Q931 to ISUP trunks.

But from VoIP trunks (SIP and H.323) the CLI is not being transferred. I am using PGW 9.6(1).

Any ideas to help?

thanks

[Chester Rieman]

Stated here:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9appa.htm#wp1189144

Note Used in all protocols that are based on Q761.

Note Only valid for ISDN PRI inbound to either C7 ISUP outbound or ISDN PRI outbound.

Hope this helps...