Configure 2 Cisco VG200 gateways to talk to each other

[bzhong1231]

Hi all,

I was just wondering, is it possible to configure two VG200 gateways talk to one another?  For example, the network topology I am thinking about is the following:

     IP Phone ------> VG200 ----> WAN ---> VG200 ----> IP Phone

Of course, there will be routers/switches/CCM.  The above illustrates the voice traffic flow.

Billy

[paolo bevilacqua]

Of course, it is possible.

You don't even need a CCM for that.