cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1275
Views
0
Helpful
3
Replies
Highlighted
Beginner

Extension Mobility Cross Cluster(EMCC) on Call Manager Express

Hey,

I am working for a client who want to have Extension Mobility on two differents location. EMCC seems to be the perfect solution but I have a problem.

My client has only 2 Routers 2811/CME (And doesn't want to buy a CUCM) and i can't find any information about EMCC on CME.

I am pretty sure it doesn't handle it but i want to be sure.

Is EMCC works on CME or not at all? If not, is there any solution to do the same feature?

Thanks,

Romain

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Cisco Employee

Please post in the right section, this is video over ip.

And to answer your question, EMCC requires CUCM. There's nothing similar for CME.

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Cisco Employee

Please post in the right section, this is video over ip.

And to answer your question, EMCC requires CUCM. There's nothing similar for CME.

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

View solution in original post

Highlighted

Thanks for the answer, so the only way is investment =)

Highlighted

You cannot do cross-system with CME, but you can emulate it, at least in theory.

Configure the same EM DN and credentials on both systems.

Configure a less specific, or lower precedence dial-peer on both CMEs to reach the EM extensions. That should make the call go to the eother system if the EM DN is not loggend on the local CME.

Content for Community-Ad

This widget could not be displayed.