%HPI-3-CODEC_NOT_LOADED

[seheng]

Hi,

Could someone assist me on this problem?

I am using Cisco 2610XM router with IOS flash:c2600-ipvoice-mz.123-1a.bin.

After the router have been up for sometime then the VIC-2FXS hang, no dial tone. then I will received any error massage %HPI-3-CODEC_NOT_LOADED.

Normally after reset the router then everything is back to normal

is the any way to solve this problem beside resetting the router?

Thanks

Seheng

[spremkumar]

Hi ther

the ios u hv mentioned has been defered for the below reasons :

DDTS No(s):

CSCeb49708

Headline: NRP2 hangs while trying to establish PPPoEoE session

CSCec06547

Headline: seeing MIPC timer error after boot and PIF-3-GIGE_DISABLE_GMAC_ERROR

CSCin50865

Headline: Called part hangs during the H.323 call

may be u r hitting the last bug so do upgrade the ios to other version.

regds

prem

[seheng]

Hi Prem,

Which version of IOS you can recommand?

thanks alot

Sim

[spremkumar]

Hi

i would suggest to chek this link and choose the ios as per your requirement..

http://cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi?get_crypto=&data_from=&hardware_name=2610XM-2611XM&software_name=&release_name=&majorRel=12.3&state=:HW&type=

Note:CCO login is reqd to access this page..

regds

prem