08-24-2005 05:41 PM
I have HQ Router(R3662) and Branch site router (R2811)
But there does not connect each other
So, I had debug Branch site Router
but I can't get any states without debug voip ccapi all
---------- debug --------
Branch#debug rtsp all
All RTSP client debugging is on
Branch#debug voip application all
All application debugging is on
Branch#debug voip vtsp all
voip vtsp all debugging is on
Branch# debug voip ccapi all
voip ccapi all debugging is on
Branch#
*Aug 24 22:43:24.503: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/CCAPI/cc_api_sup
ported_data:
data_mode=0x10082
*Aug 24 22:43:39.503: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/CCAPI/cc_get_cal
l_entry:
CALL_ERROR_INFORMATIONAL; Call Id Is Invalid=-1
------------------ END ----------
I had guess that DSP module is broken
Waht is the matter ?
Solved! Go to Solution.
08-25-2005 07:16 AM
08-25-2005 07:16 AM
Not enough info - H323? versions? configs?
dsp output?
08-25-2005 08:23 PM
I'm Sorry for my carelessness
We use for H.323 and Configs reads as follows
and than I had get the other debug state
------------- Configs -------------
** HQ Router Configuration
!
version 12.3
class-map match-all voice
match access-group 101
!
policy-map voice
class voice
priority 512
!
!
interface FastEthernet 0
ip address HQ IP Address
service-policy output voice
ip rtp priority 16384 16383 30
!
!
dial-peer voice Branch site Dial A Number voip
destination-pattern Branch site Dial A Number
session target ipv4:Branch site IP Address
ip qos dscp cs5 media
!
dial-peer voice Branch site Dial B Number voip
destination-pattern Branch site Dial B Number
session target ipv4:Branch site IP Address
ip qos dscp cs5 media
!
dial-peer voice HQ Dial A Number pots
destination-pattern HQ Dial A Number
port 2/0:1
!
access-list 101 permit ip any any precedence critical
access-list 101 permit udp any any range 16384 20000
access-list 101 permit udp any any range 53000 56000
access-list 101 permit tcp any any eq 1720
** Branch Site Router Configuration
!
class-map match-all voice
match access-group 101
!
!
policy-map voice
class voice
priority 48
!
!
no crypto isakmp ccm
!
!
!
interface FastEthernet0/0
ip address Branch site IP Address
service-policy output voice
!
access-list 101 permit ip any any precedence critical
access-list 101 permit udp any any range 16384 20000
!
dial-peer voice 1 pots
destination-pattern Branch site Dail A Number
port 1/0/0
!
dial-peer voice 2 pots
destination-pattern Branch site Dial B Number
port 1/0/1
dial-peer voice HQ Dial A Number voip
destination-pattern HQ Dial A Number
session target ipv4:HQ IP Address
ip qos dscp cs5 media
08-25-2005 08:29 PM
Add Iformation for the other debug
--------- debug ----------------
*** debug cch323 all And debug ip tcp transactions
Branch Site#
*Aug 25 04:46:02.165: TCB46FA69E0 created
*Aug 25 04:46:02.169: TCP0: state was LISTEN -> SYNRCVD [1720 -> HQ IP Address(1
1110)]
*Aug 25 04:46:02.169: TCP: tcb 46FA69E0 connection to HQ IP Address:11110, peer
MSS 536, MSS is 516
*Aug 25 04:46:02.169: TCP: sending SYN, seq 1705534498, ack 1581257081
*Aug 25 04:46:02.169: TCP0: Connection to HQ IP Address:11110, advertising MSS 5
36
*Aug 25 04:46:02.169: TCP0: state was SYNRCVD -> ESTAB [1720 -> HQ IP Address(11
110)]
*Aug 25 04:46:02.169: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/H323/cch323_ct_m
ain: SOCK 0 Event 0x1
*Aug 25 04:46:02.173: TCB471BE068 accepting 46FA69E0 from HQ IP Address.11110
*Aug 25 04:46:02.173: TCB46FA69E0 setting property TCP_PID (8) 4683A8C4
*Aug 25 04:46:02.173: TCB46FA69E0 setting property TCP_NO_DELAY (1) 4683A8C8
*Aug 25 04:46:02.173: TCB46FA69E0 setting property unknown (15) 4683A944
*Aug 25 04:46:02.173: TCB46FA69E0 setting property TCP_NO_DELAY (1) 4683A91C
*Aug 25 04:46:02.173: TCB46FA69E0 setting property TCP_ALWAYSPUSH (17) 4683A91C
*Aug 25 04:46:02.173: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/H323/cch323_get_
new_ccb: ccb (0x4718A260) is in use
*Aug 25 04:46:17.173: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/H323/cch323_time
r_dispatch: Timer[CCH323_H225_CONNECTION_TIMER] expired
*Aug 25 04:46:17.173: TCP0: state was ESTAB -> FINWAIT1 [1720 -> HQ IP Address(1
1110)]
*Aug 25 04:46:17.173: TCP0: sending FIN
*Aug 25 04:46:17.173: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/H323/h323_gw_cle
an_send_blocked_watch: fd 2
*Aug 25 04:46:17.173: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/H323/h323_set_cc
_cause_for_spi_err:
Categorized cause:38, category:186
*Aug 25 04:46:17.173: //-1/00000000-0000-0000-0000-000000000000/H323/h323_set_re
lease_src_and_iec: Failed AV set
*Aug 25 04:46:17.173: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/H323/h323_set_re
lease_source_for_peer: ownCallId[-1], src[6]
*Aug 25 04:46:17.173: //-1/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/H323/cch323_clea
nup_xport: IP_entry is NULL, returning
*Aug 25 04:46:17.197: TCP0: state was FINWAIT1 -> FINWAIT2 [1720 -> HQ IP Address (11110)]
09-01-2005 12:30 AM
I had solved this problem so hard by help for Cisco TAC
that problem is the section of satellite communications.
Cisco TAC say that "the root cause might be the failure of TCP 1720 port connection for call setup of voice.
Although satellite modem always send TCP keepalive packets to source address of TCP 1720 port, the other side couldn't response of that.
I think that was the root cause of calling failure.
So, TCP timeout had occurred by above."
and than they suggested to use for GRE tunnel for voice traffic
and I success
thank you very much for Cisoc TAC Teams
and Special Thanks for Daniel Choi (his Korea Cisco TAC engineer)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide