Integration of a sip trunk on cisco 2610xm

[ciscosniper7]

Hello,

here is my problem .... I have a sip trunks line (data and voice) from the operator .... sip trunk cable is plugged into trunk port of router (Zyxel) ....I made a filter for the lines....first for data (Internet), second for  voice (VoIP) ... data it works very well.                                                                                        Now i want to install the other line (voIP) in cisco router (CME) ... Plz help Me .                                                                                                                                                                                      

[Muthurani Lavanya Paneerselvam]

Hi

Call Manager Express (CME) is not supported in 2610 platform. Even CME 4.x is supported from 2800, 3800 series onwards..  Refer this below link for platform support.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme42spc.htm

Its pretty simple to install CME if you have any 2800 series router.  Thanks.  Pl rate if info is useful.

[Muthurani Lavanya Paneerselvam]

Hi

Further to update you, Pl find the platform support for all the CME versions.. Thanks

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_device_support_tables_list.html.

Pl rate if info is useful.