dears,
1. i configured 2 IPLNK at my PGW2200:
prov-add:IPLNK:NAME="nas-iplink1",DESC="IP link 1 to AS5400",SVC="naspath1-abdali",
IPADDR="IP_Addr1",PORT=3001,PEERADDR="xx.xxx.xx.49",PEERPORT=3001,PRI=1,IPROUTE=""
prov-add:IPLNK:NAME="nas-iplink2",DESC="IP link 2 to AS5400",SVC="naspath2-tlaaali",
IPADDR="IP_Addr1",PORT=3003,PEERADDR="xx.xxx.xx.49",PEERPORT=3003,PRI=1,IPROUTE=""
I need to add new one as follow:
prov-add:iplnk:name="nas-iplink3",desc="IP link 2 to AS5400",svc="nasp
ath2- Inter",ipaddr="IP_Addr1",port=3002,peeraddr="xx.xxx.xx.49",peerport=3002,pri=1,iproute=""
Can i Replace ( port=3003 & peerport=3003 ) with ( port=3002 & peerport=3002 ) at my PGW 2200?
2. i configured rlm group 0 & rlm group 1 at my AS5400 i need to add new rlm group 2
rlm group 0
server PGW1
link address xx.xxx.xx.10 source FastEthernet0/0 weight 1
!
rlm group 1
protocol rlm port 3002
server PGW1
link address xx.xxx.xx.10 source FastEthernet0/0 weight 1
to add new rlm group can do like following:
rlm group 2
protocol rlm port 3001
server PGW1
link address xx.xxx.xx.10 source FastEthernet0/0 weight 1
BR,
Tareq.
